SMETS1 Supporting Requirements

11.3 · Activate Firmware

Section 18 requirements joined to the Device Model Variations to Equivalent Steps Matrix.

How the data is joined

Source model and interpretation

The matrix identifies one or more Section 18 references in column B and one or more SRVs in column C. Where a row lists several references, this page uses the PDF section owner to select the reference for the current SRV. A single reference explicitly listed with several SRVs is treated as applying to each of those SRVs. Only profiles marked x are displayed below; the complete source status remains preserved in the generated data.

x · Affectedn/a · Not applicablep · PPMID onlyText · Conditional noteBlank · No variation recorded
Requirements source
SEC-Appendix-AM-SMETS1-Supporting-Requirements-v17.0.pdf · v17.0 · Section 18, PDF pages56–110
Matrix source
SEC-Appendix-AM-Annex-A-Device-Model-Variations-to-Equivalent-Steps-Matrix-v12.4.xlsx · v12.4 · worksheetDMVES

Annex A matrix

Device-model applicability

Select one or more values in each filter. Values within a filter are matched as OR; different filters are combined as AND against the same device combination. Options that cannot match the selections in the other filters are disabled automatically.

Manufacturer
Device Type
Model
Firmware

18.65a · source row 314

Activate Firmware

18.65a · Where more than 90 calendar days have elapsed since receipt by the DCC of the associated Update Firmware Service Request, the S1SP shall create a SMETS1 Response indicating failure and shall take no further action.

Affected device and firmware combinations

Manufacturer
Aclara
Device Type
ESME
Model
SGM1311
Firmware
03.03.06
Manufacturer
Aclara
Device Type
GSME
Model
G4SZV
Firmware
04.22.16
Manufacturer
Aclara
Device Type
CHF
Model
SGC1311
Firmware
03.03.13
Manufacturer
Aclara
Device Type
ESME
Model
SGM1312
Firmware
03.03.06
Manufacturer
Aclara
Device Type
GSME
Model
G4SZV
Firmware
04.24.16
Manufacturer
Aclara
Device Type
ESME
Model
SGM1312
Firmware
00:03:03:0A
Manufacturer
Honeywell
Device Type
ESME
Model
AS300P
Firmware
ASP 04.04.01-55497
Manufacturer
Honeywell
Device Type
GSME
Model
BK-G4E EI2
Firmware
0.10.94
Manufacturer
Honeywell
Device Type
CHF
Model
AMR110R
Firmware
03.07.09 (49) Rev 09
Manufacturer
Honeywell
Device Type
ESME
Model
AS300P
Firmware
ASP 04.04.01-60250
Manufacturer
Honeywell
Device Type
CHF
Model
AMR110R
Firmware
03.07.09 (53) - REV09
Manufacturer
Itron
Device Type
ESME
Model
EM425-UK
Firmware
03.00.03.46/53.17
Manufacturer
Itron
Device Type
GSME
Model
RF1 Sv ZB
Firmware
012-00.292/10D6
Manufacturer
Itron
Device Type
CHF
Model
EK410-UK
Firmware
00.03.00.33/53.37
Manufacturer
Itron
Device Type
CHF
Model
EK410-UK
Firmware
03.36.53.37

18.65b · source row 315

Activate Firmware

18.65b · Where a firmware upgrade process for the target Device or another Device on the same HAN is underway, the S1SP shall return a Response indicating failure.

Affected device and firmware combinations

Manufacturer
Secure Meters
Device Type
ESME
Model
Liberty 100 (with aux)
Firmware
P4X9G01
Manufacturer
Secure Meters
Device Type
GSME
Model
EG4v11
Firmware
Q4X2G0E

18.65c · source row 316

Activate Firmware

18.65c · Not Used.

Affected device and firmware combinations

No affected device and firmware combination is marked for this clause.

18.65d · source row 317

Activate Firmware

18.65d · Where a firmware upgrade process for the target Device or another Device on the same HAN is underway, the currently underway firmware upgrade process will be stopped and the S1SP shall return a SMETS1 Response indicating failure for the upgrade that has been stopped.

Affected device and firmware combinations

Manufacturer
Landis+Gyr
Device Type
ESME
Model
E470
Firmware
xxxxxxx
Manufacturer
Landis+Gyr
Device Type
GSME
Model
G470
Firmware
xxxxxxxxx
Manufacturer
Landis+Gyr
Device Type
CHF
Model
SEAP2000
Firmware
xxxxxxxxx
Manufacturer
Landis+Gyr
Device Type
CHF
Model
SEAP2001
Firmware
xxxxxxxxx

18.65e · source row 318

Activate Firmware

18.65e · Where any Device listed in this Service Request is of a Device Model identified in Annex E, the resulting behaviours will be uncertain.

Affected device and firmware combinations

No affected device and firmware combination is marked for this clause.