Service Reference Variant

4.11.1 · Read Tariff (Primary Element)

Service details

Identifiers, rules, and applicability

Service reference
4.11
Service Reference Variant
4.11.1
DUIS section
3.8.33
Command variants
1, 2, 3
DUIS possible responses
AcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical
No
Sensitive response
No
Protection against replay
No
On demand
Yes
Future dated
No
DSP scheduled
No
DCC only
No
SMETS1 applicability
Yes
SAPC requirement
Optional
DUIS applicability
3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS248 attributes0x003AESME
SpecificationItemReferenceDescription
SMETSCurrency Units [INFO]5.7.4.9The Currency Units currently used by ESME, which shall be either GB Pounds or European Central Bank Euro.
SMETSStanding Charge [INFO]5.7.4.42A charge to be levied in Currency Units per unit time when operating in Credit Mode and Prepayment Mode.
SMETSTariff Block Price Matrix [INFO]5.7.4.47A 4 x 8 matrix containing Prices for Block Pricing.
SMETSTariff Switching Table [INFO]5.7.4.48A set of rules for allocating half-hourly Consumption to a Tariff Register for Time-of-use Pricing and Time-of-use with Block Pricing. The rules stored within the table shall specify which of 16 Day Profiles should be used to allocate Consumption to Tariff Registers according to:
SMETSTariff Threshold Matrix [INFO]5.7.4.49A 3 x 8 matrix capable of holding thresholds in kWh for controlling Block Tariffs.
SMETSTariff TOU Price Matrix [INFO]5.7.4.50A 1 x 48 matrix containing prices for Time-of-use Pricing.
SMETSActive Tariff Price [INFO]5.7.5.5The Price currently active.
SMETSPrimary Active Tariff Price [INFO]5.13.2.6The Price currently active for Consumption via the primary measuring element of the Electricity Meter.
GCS21f7 attributes0x009FGSME
SpecificationItemReferenceDescription
SMETSCurrency Units4.6.4.6The Currency Units currently used by GSME, which shall be either GB Pounds or European Central Bank Euro.
SMETSStanding Charge4.6.4.23A charge to be levied in Currency Units per unit time when operating in Credit Mode and Prepayment Mode.
SMETSTariff Block Price Matrix4.6.4.29A 4 x 1 matrix containing Prices for Block Pricing.
SMETSTariff Switching Table4.6.4.30A set of rules for allocating daily Consumption to a Tariff Register for Time-of-use Pricing and Time-of-use with Block Pricing. The rules stored within the table shall specify which of four Day Profiles should be used to allocate Consumption to a Tariff Register according to:
SMETSTariff Threshold Matrix4.6.4.31A 3 x 1 matrix capable of holding thresholds in kWh for controlling Block Tariffs.
SMETSTariff TOU Price Matrix4.6.4.32A 1 x 4 matrix containing Prices for Time-of-use Pricing.
SMETSActive Tariff Price4.6.5.2The Price currently active.

Specific Errors

Response codes and descriptions

No specific validation is defined for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code
ECS240x003A
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
ResponseESMENot always GBT
SMETS1 Applicable
Yes
Eligible Roles
EISOUESME
Use Case / Message Code
GCS21f0x009F
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
Yes
Eligible Roles
GISOUGSMEGPF

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →