UK Smart MeteringKnowledge ProjectStructured SRV and specimen referenceBrowse SRVs

SMETS1 Supporting Requirements

4.8.1 · Read Active Import Profile Data

Section 18 requirements joined to the Device Model Variations to Equivalent Steps Matrix.

How the data is joined

Source model and interpretation

The matrix identifies one or more Section 18 references in column B and one or more SRVs in column C. Where a row lists several references, this page uses the PDF section owner to select the reference for the current SRV. A single reference explicitly listed with several SRVs is treated as applying to each of those SRVs. Only profiles marked x are displayed below; the complete source status remains preserved in the generated data.

x · Affectedn/a · Not applicablep · PPMID onlyText · Conditional noteBlank · No variation recorded
Requirements source
SEC-Appendix-AM-SMETS1-Supporting-Requirements-v17.0.pdf · v17.0 · Section 18, PDF pages56–110
Matrix source
SEC-Appendix-AM-Annex-A-Device-Model-Variations-to-Equivalent-Steps-Matrix-v12.4.xlsx · v12.4 · worksheetDMVES

Annex A matrix

Device-model applicability

Select one or more values in each filter. Values within a filter are matched as OR; different filters are combined as AND against the same device combination. Options that cannot match the selections in the other filters are disabled automatically.

Manufacturer
Device Type
Model
Firmware

18.22a · source row 188

Read Active Import Profile Data

18.22a · Where the target SMETS1 GSME or SMETS1 GPF does not return any LogEntry (with its MMC meaning) where the StartDateTime is later than the DateCommissioned (with their DUIS meanings) of the target Device, then the S1SP shall return a Response without any LogEntry.

Affected device and firmware combinations

Manufacturer
Aclara
Device Type
GSME
Model
G4SZV
Firmware
04.22.16
Manufacturer
Aclara
Device Type
GSME
Model
G4SZV
Firmware
04.24.16

18.22b · source row 189

Read Active Import Profile Data

18.22b · Not Used.

Affected device and firmware combinations

No affected device and firmware combination is marked for this clause.

18.22c · source row 190

Read Active Import Profile Data

18.22c · Not Used.

Affected device and firmware combinations

No affected device and firmware combination is marked for this clause.

18.22d · source row 191

Read Active Import Profile Data

18.22d · Not Used.

Affected device and firmware combinations

No affected device and firmware combination is marked for this clause.

18.22e · source row 192

Read Active Import Profile Data

18.22e · Pursuant to clause 18.9(d), where the target SMETS1 ESME, has deleted the data from the device, the only LogEntries (with its MMC meaning) returned in the SMETS1 Response will be those after the restriction has been applied unless there has been an active DSP Schedule for this service request that covers part of the ReadLogPeriod (with its DUIS meaning), in which case this data may be returned.

Affected device and firmware combinations

Manufacturer
Landis+Gyr
Device Type
ESME
Model
E470
Firmware
xxxxxxx

18.22f · source row 193

Read Active Import Profile Data

18.22f · Where the target SMETS1 GSME does not support the reading of more than 24 hours’ worth of data and the ReadLogPeriod (with its DUIS meaning) is greater than 24 hours then the S1SP shall return a SMETS1 Response with 48 LogEntrys (with its MMC meaning) where the Timestamp of the first LogEntry (with their MMC meanings) will be equal to or later than the specified StartDateTime (with its DUIS meaning) in the request.

Affected device and firmware combinations

Manufacturer
Landis+Gyr
Device Type
GSME
Model
G470
Firmware
xxxxxxxxx

18.22g · source row 194

Read Active Import Profile Data

18.22g · The provisions of Clause 18.17(o) also apply to this Service Request.

Affected device and firmware combinations

Manufacturer
Honeywell
Device Type
GSME
Model
BK-G4E EI2
Firmware
0.10.94