UK Smart MeteringKnowledge ProjectStructured SRV and specimen referenceBrowse SRVs

Service Reference Variant

6.2.4 · Read Device Configuration (Identity Exc MPxN)

Service details

Identifiers, rules, and applicability

Service reference
6.2
Service Reference Variant
6.2.4
DUIS section
3.8.49
Command variants
1, 2, 3
DUIS possible responses
AcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical
No
Sensitive response
No
Protection against replay
No
On demand
Yes
Future dated
No
DSP scheduled
No
DCC only
No
SMETS1 applicability
Yes
SAPC requirement
Optional
DUIS applicability
3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS26m4 attributes0x00F9ESME
SpecificationItemReferenceDescription
SMETSManufacturer Identifier5.7.1.2An identifier used to identify the manufacturer of ESME.
SMETSModel Type5.7.1.3An identifier used to identify the model of ESME.
SMETSMeter Variant5.7.1.4A data item to indicate if ESME is Single Element Electricity Metering Equipment, Twin Element Electricity Metering Equipment or Polyphase Electricity Metering Equipment.
SMETSSupply Tamper State5.7.4.44A setting to control the state of the Supply in the case of Unauthorised Physical Access being detected, being Locked or unchanged.
ECS26n2 attributes0x00FACHF
SpecificationItemReferenceDescription
CHTSCH Manufacturer Identifier4.6.1.2An identifier used to identify the manufacturer of the CH.
CHTSModel Type4.6.1.3An identifier used to identify the model of the CH.
GCS21m4 attributes0x00FBGSME
SpecificationItemReferenceDescription
SMETSManufacturer Identifier4.6.1.2An identifier used to identify the manufacturer of GSME.
SMETSModel Type4.6.1.3An identifier used to identify the model of GSME.
SMETSSupply Depletion State4.6.4.25A setting to control the state of the Supply in the case of loss of power to GSME, being Locked or unchanged.
SMETSSupply Tamper State4.6.4.26A setting to control the state of the Supply in the case of Unauthorised Physical Access being detected, being Locked or unchanged.

Specific Errors

Response codes and descriptions

No specific validation is defined for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code
ECS26e0x003F
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v1.1
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
No
Eligible Roles
EISEESSNAENOOUESME
Use Case / Message Code
ECS26i0x0092
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v1.1
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
No
Eligible Roles
EISEESSNAENOOUCHF
Use Case / Message Code
ECS26m0x00F9
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v2.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
Yes
Eligible Roles
EISEESSNAENOOUESME
Use Case / Message Code
ECS26n0x00FA
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v2.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
Yes
Eligible Roles
EISEESSNAENOOUCHF
Use Case / Message Code
GCS21e0x009E
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v1.1
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
No
Eligible Roles
GISSNAGNOOUGSME
Use Case / Message Code
GCS21m0x00FB
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v2.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
Yes
Eligible Roles
GISSNAGNOOUGSME

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →