Service Reference Variant

6.22 · Configure Alert Behaviour

Service details

Identifiers, rules, and applicability

Service reference: 6.22
Service Reference Variant: 6.22
DUIS section: 3.8.75
Command variants: 1, 2, 3
DUIS possible responses: AcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand Format
Critical: No
Sensitive response: No
Protection against replay: No
On demand: Yes
Future dated: No
DSP scheduled: No
DCC only: No
SMETS1 applicability: No
SAPC requirement: Optional
DUIS applicability: 3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS25a1 attribute0x00ACESME

Specification	Item	Reference	Description
SMETS	Alerts Configuration Settings	5.7.4.1	Settings to control whether to generate and send an Alert.

ECS25a11 attribute0x00EAESME

Specification	Item	Reference	Description
SMETS	Alerts Configuration Settings	5.7.4.1	Settings to control whether to generate and send an Alert.

ECS25a21 attribute0x00EBESME

Specification	Item	Reference	Description
SMETS	Events Configuration Settings	5.7.4.51	Settings to control, for each Alert described in this Section 5 and for each event which this Section 5 requires the ESME to be capable of logging in the Event Log(5.7.5.16) or Power Event Log(5.7.5.25) which is not a Critical Event, whether an Alarm is sounded and whether an Event Log entry or Power event log entry is created.

ECS25a31 attribute0x00ECESME

Specification	Item	Reference	Description
SMETS	Events Configuration Settings	5.7.4.51	Settings to control, for each Alert described in this Section 5 and for each event which this Section 5 requires the ESME to be capable of logging in the Event Log(5.7.5.16) or Power Event Log(5.7.5.25) which is not a Critical Event, whether an Alarm is sounded and whether an Event Log entry or Power event log entry is created.

ECS25b1 attribute0x00B0ESME

Specification	Item	Reference	Description
SMETS	Alerts Configuration Settings	5.7.4.1	Settings to control whether to generate and send an Alert.

ECS25b31 attribute0x00EDESME

Specification	Item	Reference	Description
SMETS	Events Configuration Settings	5.7.4.51	Settings to control, for each Alert described in this Section 5 and for each event which this Section 5 requires the ESME to be capable of logging in the Event Log(5.7.5.16) or Power Event Log(5.7.5.25) which is not a Critical Event, whether an Alarm is sounded and whether an Event Log entry or Power event log entry is created.

GCS201 attribute0x00ADGSME

Specification	Item	Reference	Description
SMETS	Alerts Configuration Settings	4.6.4.1	Settings to control whether to generate and send an Alert.

Specific Errors

Response codes and descriptions

Response Code	Response Code Description
`E062201`	The Service Request is invalid. The combination of User Role and Alert Code Configuration contents is incorrect OR at least one Alert configuration is not present.
`E062202`	The combination of Electricity Smart Meter Variant and Service Request contents is invalid
`E062203`	The GBCS version that pertains to the Device Model recorded in the SMI for this Device, does not support the chosen features of this Service Request

Source: DUIS 3.8.75.3

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code

ECS25a0x00AC

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

EISESME

Use Case / Message Code

ECS25a10x00EA

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

EISESME

Use Case / Message Code

ECS25a20x00EB

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

EISESME

Use Case / Message Code

ECS25a30x00EC

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

EISESME

Use Case / Message Code

ECS25b0x00B0

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

ENOESME

Use Case / Message Code

ECS25b30x00ED

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

ENOESME

Use Case / Message Code

GCS200x00AD

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

GBTWhat is GBT?

CommandGSMENot always GBT

SMETS1 Applicable

Eligible Roles

GISGSME

DUIS Service Definition

Data items and DCC processing

Request data items

Table 198: ConfigureAlertBehaviour (sr:ConfigureAlertBehaviour) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
ElectricitySupplierAlerts	The configuration settings for WAN Alerts which the IS can configure on the ESME	sr:ElectricitySupplierAlerts See Table 199	IS and ESME where the GBCS Version is Version 1.0: Yes IS and ESME where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
ElectricitySupplierHANAlertSettings	The configuration settings for HAN Alerts which the IS can configure on the ESME. ElectricitySupplierHANAlertSettings is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List	sr:ElectricitySupplierAlerts See Table 199	IS and ESME where the where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
ElectricitySupplierAlarmSettings	The configuration settings for audible Alarms (associated to WAN Alerts, HAN Alerts and / or events recorded in the Event Log) which the IS can configure on the ESME. ElectricitySupplierAlarmSettings is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List	sr:ElectricitySupplierAlerts See Table 199	IS and ESME where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
ElectricitySupplierLoggi ngSettings	The configuration settings for logging Events in the Event Logs, which the IS can configure on the ESME. ElectricitySupplierLoggingSettings is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List	sr:ElectricitySupplierAlerts See Table 199	IS and ESME where the where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
ElectricityNetworkOperatorAlerts	The configuration settings for WAN Alerts which the ED can configure on the ESME.	sr:ElectricityNetworkOperatorAlerts See Table 200	ED and ESME where the GBCS Version is Version 1.0: Yes ED and ESME where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
ElectricityNetworkOperatorLoggingSettings	The configuration settings for logging Events in the Power Event Log, which the ED can configure on the ESME. ElectricityNetworkOperatorLoggingSettings is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List	sr:ElectricityNetworkOperatorAlerts See Table 200	ED and ESME where the GBCS Version is Version 2.0: Optional Otherwise: N/A	None	N/A
GasSupplierAlerts	The configuration settings for WAN Alerts which the GS can configure on the GSME. GasSupplierAlerts is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 1.0 according to the entry for that Device Model in the Central Products List	sr:SupplierGSME See Table 201	GS and GSME where the GBCS Version is Version 1.0: Yes Otherwise: N/A	None	N/A
GasSupplierAlertEventSettings	The configuration settings for WAN Alerts, HAN Alerts, logging of Events in the Event Log and / or audible Alarms (associated to WAN Alerts, HAN Alerts and / or events recorded in the Event Log) which the GS can configure on the GSME. GasSupplierAlertEventSettings is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List	sr: SupplierGSMEAlertsEvents See Table 202	GS and GSME where the GBCS Version is Version 2.0: Yes Otherwise: N/A	None	N/A

Table 199: ElectricitySupplierAlerts (sr:ElectricitySupplierAlerts) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
SupplierESMECommon	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert, HAN Alert, audible Alarm or logging of Events to the Event Log behaviours that are applicable to both Single and Poly Phase meters are to be configured.	sr:SupplierESMECommon See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A
SupplierESMEPolyPhase	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert, HAN Alert, audible Alarm or logging of Events to the Event Log behaviours that are only applicable to Poly Phase meters are to be configured.	sr:SupplierESMEPolyPhase See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A

Table 200: ElectricityNetworkOperatorAlerts (sr:ElectricityNetworkOperatorAlerts) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
NetworkOperatorESMECommon	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert or logging of Events to the Power Event Log behaviours that are applicable to both Single and Poly Phase meters are to be configured.	sr:NetworkOperatorESMECommon See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A
NetworkOperatorESMESinglePhase	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert or logging of Events to the Power Event Log behaviours that are only applicable to Single Phase meters are to be configured.	sr:NetworkOperatorESMESinglePhase See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A
NetworkOperatorESMEPolyPhase	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert or logging of Events to the Power Event Log behaviours that are only applicable to Poly Phase meters are to be configured.	sr:NetworkOperatorESMEPolyPhase See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A

Table 201: GasSupplierAlerts (sr:SupplierGSME) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
GasSupplierAlerts	A set of Event / Alert Codes (as defined by GBCS) for which WAN Alert behaviours that are applicable to a Gas Smart Meter are to be configured.	sr:SupplierGSME See Table 204	No (If included, at least 1 Alert Code must be configured)	None	N/A

Table 202: GasSupplierAlertEventSettings (sr:SupplierGSMEAlertsEvents) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
GasSupplierAlertEventSettings	A set of Event / Alert Codes(as defined by GBCS) with configurable WAN Alert, HAN Alert, Alarm and / or Event Logging that are applicable to a Gas Smart Meter are to be configured.	sr:WANHANEventLogAlarm See Table 203	No (If included, at least 1 Alert Code must be configured)	None	N/A

Table 203: WANHANEventLogAlarm (sr:WANHANEventLogAlarm) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
XML Tag name is the GBCS Alert Code without the leading zero. e.g. x81AA (for Alert 0x81AA)	Applicable to each Event / Alert Code with configurable WAN Alert, HAN Alert, Event Log and Alarm on the GSME. For each of these alerts, e.g. 0x81AA, the WAN Alert, HAN Alert, the Event Log and the Alarm have to be configured at the same time, but their setting (enable / disable) can be different	See Table 204	No	None	N/A

Table 204: Alert Type (sr:EnableDisableAlert) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
AlertCode XML Tag name is the GBCS Alert Code without the leading zero. e.g. x81AD	Each of the following elements contain a sequence of GBCS Alert Codes; SupplierESMECommon SupplierESMEPolyPhase NetworkOperatorESMECommon NetworkOperatorESMESinglePhase NetworkOperatorESMEPolyPhase GasSupplierAlerts GasSupplierAlertEventSettings See clause 16.2 of GBCS for the definition of these codes. Each Device Alert may be enabled (turned on) or disabled (turned off), if a Device Alert is not reconfigured as part of this Service Request then its configuration state is unchanged. Valid set; Enable Disable	sr:EnableDisableAlert (Restriction of xs:string (Enumeration))	No	None	N/A

Message Patterns & Examples

Pattern explorer

Open Message Patterns →