Service Reference Variant

8.8.1 · Unjoin Service (Critical)

Service details

Identifiers, rules, and applicability

Service reference
8.8
Service Reference Variant
8.8.1
DUIS section
3.8.111
Command variants
4, 5, 6, 7
DUIS possible responses
Response to Transform Request - PreCommand FormatAcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical
Yes
Sensitive response
No
Protection against replay
Yes
On demand
Yes
Future dated
No
DSP scheduled
No
DCC only
No
SMETS1 applicability
Yes
SAPC requirement
Mandatory
DUIS applicability
3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

CS04AC2 commands1 attribute0x000FESME

Commands mapped to CS04AC

  • SMETSAdd Device Security Credentials5.6.3.4ESME
  • SMETSRemove Device Security Credentials5.6.3.19ESME
SpecificationItemReferenceDescription
SMETSDevice Log5.7.4.14The Security Credentials for each of the Type 1 Devices and Type 2 Devices with which ESME can establish Communications Links.

Specific Errors

Response codes and descriptions

Response CodeResponse Code Description
E080801
This Response Code is not used. The DCC Systems Smart Metering Inventory is no longer checked for the join status of the ‘Other Device’

Source: DUIS 3.8.111.3

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code
CS04AC0x000F
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v4.3
GBCS Criticality
Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
NoYes
Eligible RolesDevice to be Removed
EISESME
HCALCSPPMID
GISGSME
PPMID
EISHCALCS
ESME
SMETS1 note

HCALCS is not a valid SMETS1 Device Type

DUIS Service Definition

Data items and DCC processing

Request data items

Table 241: UnjoinServiceCritical (sr:JoinOrUnjoinDevice) data items
Data ItemDescription / ValuesTypeMandatoryDefaultUnits
OtherDeviceIDDevice ID of the Device for which the details have to be removed from the BusinessTargetID Device Logsr:EUI (See clause 3.10.1.3)YesNoneN/A

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →