Service Reference Variant

4.10 · Read Network Data

Service details

Identifiers, rules, and applicability

Service reference: 4.10
Service Reference Variant: 4.10
DUIS section: 3.8.32
Command variants: 1, 2, 3
DUIS possible responses: AcknowledgementService Response from Device - GBCSPayloadService Response from Device - DSPScheduledMessage FormatResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical: No
Sensitive response: Elec No, Gas Yes
Protection against replay: No
On demand: Yes
Future dated: DSP
DSP scheduled: Yes
DCC only: No
SMETS1 applicability: Yes
SAPC requirement: Optional
DUIS applicability: 3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS238 attributes0x0039ESME

Specification	Item	Reference	Description
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	Average RMS Over Voltage Counter	5.7.5.7	The number of times the average RMS voltage, as calculated in Section 5.5.12.1, has been above the Average RMS Over Voltage Threshold(5.7.4.4) since last reset.
SMETS	Average RMS Under Voltage Counter	5.7.5.8	The number of times the average RMS voltage, as calculated in Section 5.5.12.1, has been below the Average RMS Under Voltage Threshold(5.7.4.5) since last reset.
SMETS	Average RMS Voltage Profile Data Log	5.7.5.9	A log capable of storing 4320 entries (including the UTC date and time at the end of the period to which the value relates) comprising the averaged RMS voltage for each Average RMS Voltage Measurement Period(5.7.4.6) arranged as a circular buffer such that when full, further writes shall cause the oldest entry to be overwritten.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].
SMETS	Phase [n] Average RMS Over Voltage Counter	5.19.2.1	The number of times the average RMS voltage for phase [n], as calculated in Section 5.17.2.1, has been above the Phase [n] Average RMS Over Voltage Threshold(5.19.1.1) since this counter was last reset.
SMETS	Phase [n] Average RMS Under Voltage Counter	5.19.2.2	The number of times the average RMS voltage for phase [n], as calculated in accordance with Section 5.17.2.1, has been below the Phase [n] Average RMS Under Voltage Threshold(5.19.1.2) since this counter was last reset.
SMETS	Phase [n] Average RMS Voltage Profile Data Log	5.19.2.3	A log capable of storing 4320 entries (including the UTC date and time at the end of the period to which the values relate) comprising the averaged RMS voltage for phase [n] for each Phase [n] Average RMS Voltage Measurement Period(5.19.1.3) arranged as a circular buffer such that when full, further writes shall cause the oldest entry to be overwritten.

ECS23b8 attributes0x00BCESME

Specification	Item	Reference	Description
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	Average RMS Over Voltage Counter	5.7.5.7	The number of times the average RMS voltage, as calculated in Section 5.5.12.1, has been above the Average RMS Over Voltage Threshold(5.7.4.4) since last reset.
SMETS	Average RMS Under Voltage Counter	5.7.5.8	The number of times the average RMS voltage, as calculated in Section 5.5.12.1, has been below the Average RMS Under Voltage Threshold(5.7.4.5) since last reset.
SMETS	Average RMS Voltage Profile Data Log	5.7.5.9	A log capable of storing 4320 entries (including the UTC date and time at the end of the period to which the value relates) comprising the averaged RMS voltage for each Average RMS Voltage Measurement Period(5.7.4.6) arranged as a circular buffer such that when full, further writes shall cause the oldest entry to be overwritten.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].
SMETS	Phase [n] Average RMS Over Voltage Counter	5.19.2.1	The number of times the average RMS voltage for phase [n], as calculated in Section 5.17.2.1, has been above the Phase [n] Average RMS Over Voltage Threshold(5.19.1.1) since this counter was last reset.
SMETS	Phase [n] Average RMS Under Voltage Counter	5.19.2.2	The number of times the average RMS voltage for phase [n], as calculated in accordance with Section 5.17.2.1, has been below the Phase [n] Average RMS Under Voltage Threshold(5.19.1.2) since this counter was last reset.
SMETS	Phase [n] Average RMS Voltage Profile Data Log	5.19.2.3	A log capable of storing 4320 entries (including the UTC date and time at the end of the period to which the values relate) comprising the averaged RMS voltage for phase [n] for each Phase [n] Average RMS Voltage Measurement Period(5.19.1.3) arranged as a circular buffer such that when full, further writes shall cause the oldest entry to be overwritten.

GCS181 attribute0x0079GSME

Specification	Item	Reference	Description
SMETS	Network Data Log	4.6.5.12	A log capable of storing four hours of UTC date and time stamped six minute Consumption data arranged as a circular buffer such that when full, further writes shall cause the oldest entry to be overwritten.

Specific Errors

Response codes and descriptions

No specific error data is available for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code

ECS230x0039

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBTWhat is GBT?

ResponseESMENot always GBT

SMETS1 Applicable

Yes

Eligible Roles

EISENOESME

Use Case / Message Code

ECS23b0x00BC

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBTWhat is GBT?

ResponseESMENot always GBT

SMETS1 Applicable

Eligible Roles

EISENOESME

Use Case / Message Code

GCS180x0079

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Yes

Future Dated

DSP

GBT

SMETS1 Applicable

Yes

Eligible Roles

GISGNOGSME

DUIS Service Definition

Data items and DCC processing

Request data items

Table 146: ReadNetworkData (sr:ReadLogFutureDatableAndURPCredentials) data items

Data Item	Description / Allowable values	Type	Mandatory	Default	Units
ExecutionDateTime	A User shall only add this Data Item to the Service Request where they require the Service Request to be executed at a future date and time. The UTC date and time the User requires the command to be executed on the Device Date-time in the future that is either <= current date + 30 days or the date = ‘3000-12-31T00:00:00Z’	xs:dateTime	No	None	UTC Date-Time
ReadLogPeriod	The Start and End Date-Times for which the data is required Note that for Service Requests targeted at Gas Smart Meters, this date range must surround the 4 hour period.	sr:ReadLogPeriod (see clause 3.10.1.14)	Yes	None	N/A
KAPublicSecurityCredentials	The Key Agreement Public Security Credentials (of the requesting party) to be used where the request is from an Unknown Remote Party (i.e. Gas Transporter) with respect to the BusinessTargetID specified within the Service Request.	xs:base64Binary	User Role IS, GS, ED: N/A User Role GT: Yes	None	N/A

Table 147: DSPReadNetworkData (sr:ReadLogPeriodOffset) data items

Data Item	Description / Allowable values	Type	Mandatory	Default	Units
DSPReadNetworkData	The Start and End Date Offsets from the current date and the Start and End Times which together define the date-time period for which the data is required	sr:ReadLogPeriodOffset (See clause 3.10.1.15)	Yes	None	N/A

DUGIDS service matrix

DUGIDS DS.0226 Table 36 footnote extract

Footnote	Extract	Column	Cell Value	Source
Unnumbered	Elec No, Gas Yes	Sensitive Response	Elec No, Gas Yes	DS.0226 Table 36 Service Request Matrix
7	Service Request can’t be Sequenced for Gas, because the DCC can’t read the encrypted status returned by the Device	Service Reference Variant	4.10	DS.0226 Table 36 Service Request Matrix

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →