UK Smart MeteringKnowledge ProjectStructured SRV and specimen referenceBrowse SRVs

Service Reference Variant

4.16 · Read Active Power Import

Service details

Identifiers, rules, and applicability

Service reference
4.16
Service Reference Variant
4.16
DUIS section
3.8.40
Command variants
1, 2, 3
DUIS possible responses
AcknowledgementService Response from Device - GBCSPayloadService Response from Device - DSPScheduledMessage FormatResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical
No
Sensitive response
No
Protection against replay
No
On demand
Yes
Future dated
No
DSP scheduled
Yes
DCC only
No
SMETS1 applicability
Yes
SAPC requirement
Optional
DUIS applicability
3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS17c3 attributes0x0028ESME
SpecificationItemReferenceDescription
SMETSActive Power Import [INFO]5.7.5.4The import of Active Power measured by ESME.
SMETSActive Power Import [INFO]5.13.2.1Active Power Import [INFO](5.7.5.4) in Part A shall not apply to ESME.
SMETSPrimary Active Power Import [INFO]5.13.2.5The import of Active Power measured via the primary measuring element of the Electricity Meter.

Specific Errors

Response codes and descriptions

No specific validation is defined for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code
ECS17c0x0028
DUIS Applicability
v3.0 – v5.3
GBCS Applicability
v1.0 – v4.3
GBCS Criticality
Non-Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
Yes
Eligible Roles
EISENOESME

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →