6.2.1 Read Device Configuration (Voltage) | UK Smart Metering Knowledge Project

Service details

Identifiers, rules, and applicability

Service reference: 6.2
Service Reference Variant: 6.2.1
DUIS section: 3.8.46
Command variants: 1, 2, 3
DUIS possible responses: AcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical: No
Sensitive response: No
Protection against replay: No
On demand: Yes
Future dated: No
DSP scheduled: No
DCC only: No
SMETS1 applicability: Yes
SAPC requirement: Optional
DUIS applicability: 3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS26b10 attributes0x003CESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.

ECS26k12 attributes0x00C6ESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Over Voltage Threshold	5.19.1.1	The average RMS voltage for phase [n] above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Under Voltage Threshold	5.19.1.2	The average RMS voltage for phase [n] below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.

Specific Errors

Response codes and descriptions

No specific validation is defined for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code

ECS26b0x003C

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

No

Future Dated

No

GBT

No

SMETS1 Applicable

Yes

Eligible Roles

EISSNAENOESME