Service Reference Variant

6.5 · Update Device Configuration (Voltage)

Service details

Identifiers, rules, and applicability

Service reference: 6.5
Service Reference Variant: 6.5
DUIS section: 3.8.57
Command variants: 1, 2, 3
DUIS possible responses: AcknowledgementService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical: No
Sensitive response: No
Protection against replay: Yes
On demand: Yes
Future dated: DSP
DSP scheduled: No
DCC only: No
SMETS1 applicability: Yes
SAPC requirement: Optional
DUIS applicability: 3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS29a2 commands12 attributes0x0045ESME

Commands mapped to ECS29a

SMETSReset Average RMS Over Voltage Counter5.6.3.22ESME
SMETSReset Average RMS Under Voltage Counter5.6.3.23ESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].

ECS29b4 commands14 attributes0x00AEESME

Commands mapped to ECS29b

SMETSReset Average RMS Over Voltage Counter5.6.3.22ESME
SMETSReset Average RMS Under Voltage Counter5.6.3.23ESME
SMETSReset Phase [n] Average RMS Over Voltage Counter5.18.1.1ESME
SMETSReset Phase [n] Average RMS Under Voltage Counter5.18.1.2ESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Over Voltage Threshold	5.19.1.1	The average RMS voltage for phase [n] above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Under Voltage Threshold	5.19.1.2	The average RMS voltage for phase [n] below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].

ECS29c14 attributes0x00D1ESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Over Voltage Threshold	5.19.1.1	The average RMS voltage for phase [n] above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Under Voltage Threshold	5.19.1.2	The average RMS voltage for phase [n] below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].

ECS29d14 attributes0x00D2ESME

Specification	Item	Reference	Description
SMETS	Average RMS Over Voltage Threshold	5.7.4.4	The average RMS voltage above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Under Voltage Threshold	5.7.4.5	The average RMS voltage below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Average RMS Voltage Measurement Period	5.7.4.6	The length of time in seconds over which the RMS voltage is averaged.
SMETS	RMS Extreme Over Voltage Measurement Period	5.7.4.34	The duration in seconds used to measure an extreme over voltage condition.
SMETS	RMS Extreme Over Voltage Threshold	5.7.4.35	The RMS voltage above which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Extreme Under Voltage Measurement Period	5.7.4.36	The duration in seconds used to measure an extreme under voltage condition.
SMETS	RMS Extreme Under Voltage Threshold	5.7.4.37	The RMS voltage below which an extreme under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Sag Measurement Period	5.7.4.38	The duration in seconds used to measure a voltage sag condition.
SMETS	RMS Voltage Swell Measurement Period	5.7.4.39	The duration in seconds used to measure a voltage swell condition.
SMETS	RMS Voltage Sag Threshold	5.7.4.40	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	RMS Voltage Swell Threshold	5.7.4.41	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Over Voltage Threshold	5.19.1.1	The average RMS voltage for phase [n] above which an over voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Under Voltage Threshold	5.19.1.2	The average RMS voltage for phase [n] below which an under voltage condition is reported. The threshold shall be configurable within the specified operating range of ESME.
SMETS	Phase [n] Average RMS Voltage Measurement Period	5.19.1.3	The length of time in seconds over which the RMS voltage is averaged for phase [n].

Specific Errors

Response codes and descriptions

Response Code	Response Code Description
`E060501`	The Voltage Settings aren’t applicable to the Electricity Smart Meter variant as defined in the Smart Metering Inventory
`E060502`	The GBCS version that pertains to the Device Model recorded in the SMI for this Device, does not support the chosen features of this Service Request

Source: DUIS 3.8.57.3

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code

ECS29a0x0045

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBT

SMETS1 Applicable

Yes

Eligible Roles

ENOESME

Use Case / Message Code

ECS29b0x00AE

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v1.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBT

SMETS1 Applicable

Eligible Roles

ENOESME

Use Case / Message Code

ECS29c0x00D1

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBT

SMETS1 Applicable

Yes

Eligible Roles

ENOESME

Use Case / Message Code

ECS29d0x00D2

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v4.3

GBCS Criticality

Non-Critical

Sensitive Response

Future Dated

DSP

GBT

SMETS1 Applicable

Eligible Roles

ENOESME

DUIS Service Definition

Data items and DCC processing

Request data items

Table 165: UpdateDeviceConfigurationVoltage (sr:UpdateDeviceConfigurationVoltage) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
ExecutionDateTime	A User shall only add this Data Item to the Service Request where they require the Service Request to be executed at a future date and time. The UTC date and time the User requires the command to be executed on the Device Date-time in the future that is either <= current date + 30 days or the date = ‘3000-12-31T00:00:00Z’	xs:dateTime	No	None	UTC Date-Time
RMSVoltageSettings	The non-average RMS Voltage settings applicable to a Single Phase (Single or Twin Element) Electricity Smart Meter or to a Polyphase Electricity Smart Meter phase.	sr:RMSVoltageSettings	Yes	None	N/A
SinglePhaseVoltageSettings	The average voltage settings applicable to a Single Phase (Single or Twin Element) Electricity Smart Meter.	sr:AverageRMSVoltageSettings	Single / Twin Element Electricity Smart Meter: Yes Polyphase Electricity Smart Meter: N/A	None	N/A
PolyPhaseVoltageSettings	The average voltage settings applicable to a PolyPhase Electricity Smart Meter.	sr:PolyPhaseVoltageSettings (minOccurs = “3”, maxOccurs = “3”)	Single / Twin Element Electricity Smart Meter: N/A Polyphase Electricity Smart Meter: Yes	None	N/A
RMSVoltageCountersNotReset	Flag to indicate that the RMS Voltage Counters are not to be reset. RMSVoltageCountersNotReset is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 2.0 according to the entry for that Device Model in the Central Products List. Its inclusion is used by the DCC Systems to map the Service Request to GBCS Use Cases ECS29c (single phase) / ECS29d (poly phase) and its absence to ECS29a (single phase) / ECS29b (poly phase)	sr:NoType	No	None	N/A

Table 166: PolyPhaseVoltageSettings (sr:PolyPhaseVoltageSettings) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
Phase	The number (n: 1, 2, 3) of the phase to which the Phase voltage Settings apply	Restriction of xs:positiveInteger minInclusive = 1. maxInclusive =3)	Yes	None	N/A
PhaseVoltageSettings	The average voltage settings applicable to each of the phases.	sr:AverageRMSVoltageSettings	Yes	None	N/A

Table 167: AverageRMSVoltageSettings (sr:AverageRMSVoltageSettings) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
AverageRMSOverVoltageThreshold	The average RMS voltage above which an over voltage condition is reported	xs:unsignedInt	Yes	None	10th Volt
AverageRMSUnderVoltageThreshold	The average RMS voltage below which an over voltage condition is reported	xs:unsignedInt	Yes	None	10th Volt
AverageRMSVoltageMeasurementPeriod	The length of time in seconds over which the RMS voltage is averaged	xs:unsignedInt	Yes	None	Seconds

Table 168: RMSVoltageSettings (sr:RMSVoltageSettings) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
RMSExtremeOverVoltageMeasurementPeriod	The duration in seconds used to measure an extreme over voltage condition	xs:unsignedInt	Yes	None	Seconds
RMSExtremeOverVoltageThreshold	The RMS voltage above which an extreme over voltage condition is reported.	xs: unsignedInt	Yes	None	10th Volt
RMSExtremeUnderVoltageMeasurementPeriod	The duration in seconds used to measure an extreme under voltage condition	xs:unsignedInt	Yes	None	Seconds
RMSExtremeUnderVoltageThreshold	The RMS voltage below which an extreme over voltage condition is reported. The threshold shall be configurable within the specified operating range of Electricity Smart Meter	xs:unsignedInt	Yes	None	10th Volt
RMSVoltageSagMeasurementPeriod	The duration in seconds used to measure a voltage sag condition	xs:unsignedInt	Yes	None	Seconds
RMSVoltageSwellMeasurementPeriod	The duration in seconds used to measure a voltage swell condition	xs:unsignedInt	Yes	None	Seconds
RMSVoltageSagThreshold	The RMS voltage below which a sag condition is reported. The threshold shall be configurable within the specified operating range of Electricity Smart Meter	xs:unsignedInt	Yes	None	10th Volt
RMSVoltageSwellThreshold	The RMS voltage above which a swell condition is reported. The threshold shall be configurable within the specified operating range of Electricity Smart Meter	xs:unsignedInt	Yes	None	10th Volt

DUGIDS service matrix

DUGIDS DS.0226 Table 36 footnote extract

Footnote	Extract	Column	Cell Value	Source
9	No for SMETS1 Devices	Protection Against Replay	Yes	DS.0226 Table 36 Service Request Matrix

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →