Service Reference Variant

6.7 · Update Device Configuration (Gas Flow)

Service details

Identifiers, rules, and applicability

Service reference: 6.7
Service Reference Variant: 6.7
DUIS section: 3.8.59
Command variants: 4, 5, 6, 7
DUIS possible responses: AcknowledgementResponse to Transform Request - PreCommand FormatService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand FormatCountersigned SMETS1 Response
Critical: Yes
Sensitive response: No
Protection against replay: Yes
On demand: Yes
Future dated: No
DSP scheduled: No
DCC only: No
SMETS1 applicability: Yes
SAPC requirement: Not stated
DUIS applicability: 3.0, 3.1, 4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

GCS24a3 attributes0x00FCGSME

Specification	Item	Reference	Description
SMETS	Supply Depletion State	4.6.4.25	A setting to control the state of the Supply in the case of loss of power to GSME, being Locked or unchanged.
SMETS	Supply Tamper State	4.6.4.26	A setting to control the state of the Supply in the case of Unauthorised Physical Access being detected, being Locked or unchanged.
SMETS	Uncontrolled Gas Flow Rate	4.6.4.33	The flow rate in units of volume per unit time used in the detection of uncontrolled flow of gas on Enablement of Supply.

Specific Errors

Response codes and descriptions

Response Code	Response Code Description
`E060701`	The GBCS version that pertains to the Device Model recorded in the SMI for this Device doesn’t support the requested value format for Uncontrolled Gas Flow Rate .

Source: DUIS 3.8.59.3

SMETS1-specific validation

Additional SMETS1 conditions are shown separately from the SRV-specific DUIS table.

SMETS1 supplementary validation

E060701

If the target Device is a SMETS1 GSME according to the Smart Metering Inventory, the XML element named UncontrolledGasFlowRateDecimal must not be included in the Service Request.For clarity, only the XML element named UncontrolledGasFlowRate may be used with SMETS1 devices

Applies to: Amended condition for SMETS1 Devices

Source: DUIS 1.4.6 Table 2

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code

GCS240x007D

DUIS Applicability

v3.0 – v5.3

GBCS Applicability

v2.0 – v3.1

GBCS Criticality

Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Yes

Eligible Roles

GISGSME

Use Case / Message Code

GCS24a0x00FC

DUIS Applicability

v3.1 – v5.3

GBCS Applicability

v3.2 – v4.3

GBCS Criticality

Critical

Sensitive Response

Future Dated

GBT

SMETS1 Applicable

Eligible Roles

GISGSME

DUIS Service Definition

Data items and DCC processing

Request data items

Table 170: UpdateDeviceConfigurationGasFlow (sr:UpdateDeviceConfigurationGasFlow) data items

Data Item	Description / Valid Set	Type	Mandatory	Default	Units
UncontrolledGasFlowRate	The flow rate in units of volume per unit time used in the detection of uncontrolled flow of gas on Enablement of Supply UncontrolledGasFlowRate is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 1.0 or 2.0 according to the entry for that Device Model in the Central Products List	xs:unsignedShort	Where the GBCS Version is Version 1.0 or 2.0: Yes Otherwise: N/A	None	m3/hour
UncontrolledGasFlowRateDecimal	The flow rate in units of volume per unit time used in the detection of uncontrolled flow of gas on Enablement of Supply UncontrolledGasFlowRateDecimal is only supported on Devices with a Device Model recorded in the Smart Metering Inventory that pertains to GBCS version 3.2 according to the entry for that Device Model in the Central Products List	Restriction of xs:decimal (minInclusive = 0, maxInclusive = 6.5535, fractionDigits=4)	Where the GBCS Version is Version 3.2: Yes Otherwise: N/A	None	m3/hour
SupplyDepletionState	A setting to control the state of the Supply in the case of loss of power to the Gas Smart Meter Valid set: Unchanged Locked	Restriction of xs:string (Enumeration)	Yes	None	N/A
SupplyTamperState	A setting to control the state of the Supply in the case of a Tamper Event being detected Valid set: Unchanged Locked	Restriction of xs:string (Enumeration)	Yes	None	N/A
StabilisationPeriod	Value indicating the time given to allow the flow to stabilize. It is defined in units of tenths of a second	Restriction of xs:positiveInteger (minInclusive = 1, maxInclusive = 255)	Yes	None	10th second
MeasurementPeriod	Value indicating the period over which the flow is measured and compared against the Uncontrolled Flow Threshold value. It is defined in units of 1 second	Restriction of xs:positiveInteger (minInclusive = 1, maxInclusive = 65535)	Yes	None	Seconds

Message Patterns & Examples

Pattern explorer

Open Message Patterns →

SMETS1 Supporting Requirements

Device-model variations and equivalent steps

Review the Section 18 requirements and their applicability across the documented manufacturer, Device Type, model, and firmware profiles.

Open S1SR Requirements →