UK Smart MeteringKnowledge ProjectStructured SRV and specimen referenceBrowse SRVs

Service Reference Variant

7.16 · Limit APC Level

Service details

Identifiers, rules, and applicability

Service reference
7.16
Service Reference Variant
7.16
DUIS section
3.8.102
Command variants
4, 5, 6, 7
DUIS possible responses
AcknowledgementResponse to Transform Request - PreCommand FormatService Response from Device - GBCSPayloadResponse to a Command for Local Delivery Request - LocalCommand Format
Critical
Yes
Sensitive response
No
Protection against replay
Yes
On demand
Yes
Future dated
No
DSP scheduled
No
DCC only
No
SMETS1 applicability
No
SAPC requirement
Mandatory
DUIS applicability
4.0, 5.0, 5.1, 5.2, 5.3

Cross-specification evidence

SMETS/CHTS to GBCS Mapping

This section shows the SMETS and CHTS attributes that can be read or written by the identified GBCS Use Case. Command requirements are shown separately from the mapped attributes.

ECS47e1 command0 attributes0x011FESME

Command mapped to ECS47e

No mapped data attributes.

Specific Errors

Response codes and descriptions

No specific validation is defined for this SRV.

GBCS Use Case

Use cases, device coverage, and applicability

Use Case / Message Code
ECS47e0x011F
DUIS Applicability
v4.0 – v5.3
GBCS Applicability
v4.0 – v4.3
GBCS Criticality
Critical
Sensitive Response
No
Future Dated
No
GBT
No
SMETS1 Applicable
No
Eligible Roles
None stated

DUIS Service Definition

Data items and DCC processing

Request data items

Table 223: .4: LimitAPCLevel (sr: LimitAPCLevel) data items
Data ItemDescription / Valid SetTypeMandatoryDefaultUnits
auxiliaryControllerN (attribute of SetAuxiliaryControllerState)The value [n] for the Auxiliary Controller[n] with its SMETS meaning. The identifier associated with the Auxiliary Controller.sr:range_1_5 (Restriction of xs:positiveInteger minInclusive 1 maxInclusive 5)YesNoneN/A
StartDateTimeThe UTC date and time at which the User requires the Device to start the APC[n] Limit Period with their SMETS meaning.xs:dateTimeYesNoneUTC Date-Time
EndDateTimeThe UTC date and time at which the User requires the Device to end the APC[n] Limit Period with their SMETS meaning.xs:dateTimeYesNoneUTC Date-Time
CommandedStateLevelAn integer indicating the required maximum input or output level of the Auxiliary Controller. The number reflects the percentage to which its maximum input or output level is to be set.sr:AuxiliaryControllerLevel (Restriction of xs:unsignedShort minInclusive = 0, maxInclusive = 100)YesNoneN/A
InputFromControlledLoadIf present, this element specifies that the direction of energy flow in the CommandedStateLevel of the APC shall relate to the input of energy from the controlled load. If not present, then the CommandedStateLevel shall relate to the output of energy to the controlled load.sr:NoType (see Annex 17)NoNoneN/A

Message Patterns & Examples

Pattern explorer

Open Message Patterns →